Random good picture Not show

1 The aim is to obtain a high yield strength, elastic limit and high toughness.

2 Variation of yield strength with shock pressure of foil like manganin gauges can be determined by analyzing their dynamic calibration curve.

3 The increase in the yield strength of the thinner microbeam is attributed to the increase in the strain gradient contribution due to inhomogeneous deformation of the small dimensional material.

4 The yield strength fy of reinforcement is used in design.

5 The V - N microalloy steel with yield strength of 550 MPa is produced by EAF - CSP route.

6 FIG. 5 shows the average yield strength as a function of extrusion speed and location.

7 The results show that the steel has high yield strength and quality forming property.

8 The yield strength,[www.Sentencedict.com] tensile ratio and toughness are major quality indexes of steel pipe ( board ).

9 The influence of phosphorus and grain size on yield strength and Charp V-notch toughness of low carbon steels have been investigated.

10 Properties determined by mechanical testing, such as yield strength, ductility, ultimate tensile strength, hardness, bendability, impact strength, etc.

11 Desirable properties for forming include low yield strength and high ductility.

12 The creep rate was increased while the yield strength was reduced by anodic dissolution.

13 The yield strength of the agglomerated material due to extrusion increases in the vicinity of cutting edge. It makes contact stress increase, and eventually results in microcrack on workpiece surface.

14 The work in this dissertation greatly improved the shear yield strength of ER fluids[sentencedict.com], which can increase the mechanical output ability of ER actuators.

15 CuPTiRE anti - erosion hot rolling stripes are divided into two grades in yield strength : 295 MPa, 345 MPa.

16 By agreement, a practical approximation of the elastic limit , called the offset yield strength, is used.

17 Pipeline steel adopting the spicular ferrite owns the better properties of forming and anti corrosion for its low ratio of yield strength and tensile strength and uniform microstructure.

18 The paper describes the measures taken to eliminate off-grade product with subsurface blister, poor and low yield strength, and to the end that the output is steadily increased.

19 Residual stress concentration a notch depends on both notch geometry and yield strength of the material.

20 FIG. 2 shows the influence of billet reheat time and temperature on tensile yield strength.

21 Super steel has the same chemical composition with plain carbon steel, but its yield strength is higher than plain carbon steel because it has fine grain size.

22 Change of molecular magnetic moment of liquor and shear yield strength are studied in magnetorheological fluid.

23 The paper introduces producting technology of hot rolling high strength double-faced enamelled steel, study on mechanism how to realize properties of double-faced enamel and high yield strength.

24 The influence of resistance welding electrode alloy's grain refined after 93K cryogenic treatment to high temperature yield strength is studied in this paper .

25 The results indicate that, with the increase of rolling times, the grain size becomes smaller, the content of sorbite multiplicates, and the yield strength improves.

26 Dislocation strengthening and grain refinement strengthening makes coil 059 with the higher yield strength.

27 Oxgen precipitates ( useful for gettering ) can reduce the yield strength ( critical shear stress ) up to fivefole.

28 Effects of vibration frequency and vibration pressure amplitude on yield strength, elongation at break, modules of elasticity in tension and impact strength of injected HDPE samples were explored.